2. Use the 2X4’s to prop open the door into a safe closing.

3. If the cord is hard to disengage, do not attempt to hang from it as this can damage it. If it breaks, you can fall down and suffer injuries.
Conclusion
The release cord is a handy tool to use when you are experiencing a power outage. It enables you to open your garage and prevents you from parking outside. Always remember to reattach door when the power comes back.

The post How do you open your garage during a power outage appeared first on Sweetie Darling.

The garage opener consists of an electric motor housed in the power unit. This unit is attached to the track; when you want to open and close the door, the trolley goes back and forth along the track. This trolley is moved along the track by a belt, direct or chain drive; they also handle the motor. The garage openers hang from the ceiling and are located at the rear of the garage door. It can be challenging selecting the right garage opener. This article is meant to help you make the right purchase.

Noise

If your bedroom is located above the garage, then the noise can cause you some sleepless nights. The problem could be the type of drive that you have. The chain drive produces the most sound. You can change it to a belt or direct drive.

Remote control

Most modern garage openers are remotely controlled. If you have an old model get your garage repair serviceman to install for one. But, if you leave in a crowded neighborhood, you will find some interference with your remote control, especially if you use a single frequency remote control. The solution is to get yourself a dual frequency model.

Security

Modern remotes come loaded with the latest security features. One of these technologies is the rolling-code security technology. To keep burglars out the remote control selects a new non-repeating access code from billions of possibilities. This means that it would take hackers and burglars a considerable amount of time just to get the access codes. You can also have a touchpad or fingerprint access remote control. However, security works if your garage is properly maintained. For instance, if the lock on your garage door does not work, then contact a garage door repair company to repair it!

Power Backup

If you do not have a battery backup, then you will have problems accessing your garage when there is a power outage. Newer garage openers have this feature. In case you do not have one you can always use the manual release to open your garage.

Overhead lighting

Lighting is a standard feature in many modern openers. These lights let you operate the opener independently of the door closing and opening. Motion sensors in some models enable the garage opener to activate lights when someone is approaching the garage automatically.

Wi-Fi Connections

Modern garage openers let you take control of all garage functions from the comfort of your phone. You can check who opened and closed the garage. You can also set passwords and grant access to friends and relatives.

Horsepower

The garage opener should be able to handle the weight of the garage door. While the doors are made from various materials, some heavier the weight is often counterbalanced. Most of the openers have horsepower of ½. You can get other models with ¾ to 1 ½ horsepower; this can handle the garage door with less strain. The units stated are for garage doors that weigh about 7 feet.

Conclusion

The garage opener is an essential component of any garage system. You should consult widely as newer models are now available in the market. These have more features and are more efficient.

The post Buying guide for the right opener for your Garage door appeared first on Sweetie Darling.

Candy gems are quite simple to make and the following some of the ways in how you can make hard candy jewels.

Things needed to make hard candy:

• A cup of sugar.
• Half a cup of light Corn Syrup and 1/4th cup of water.
• A teaspoon of the desired extract.
• Food colouring.

Special Equipment:

• One parchment paper.
• Moulds of the lollipop and hard candy.
• Cooking Spray- preferably non-stick.
• Candy Thermometer.
• Disposable pan sheets.
• Colourful and attractive threads for stringing.

Method of cooking:

Step 1: Preparing the moulds of the lollipop and hard candy.

You need to first lay down the parchment paper on the surface in which you are going to work as these papers will help you in efficiently cleaning the entire surface. Next, you need to add pins in the moulds and attach them to the pan sheets. Once that is done, sprinkle the cooking spray so that it does not stick to the surface. The cooking spray is a little messy so try to have a damp cloth to wipe the extra spray.

Step 2: Syrup Boiling.

You need to take a saucepan and then add water, corn syrup and water. Now, place the contents on the stove with medium heat and place the candy thermometer in the pan. Make sure that you do not stir the contents of the pan. Once the pan is heated to 295 degrees, you need to remove the pan from the stove.

Step 3: Food colouring and adding syrup.

Once the syrup is ready, you need to add the desired food colouring and the other flavours of the sugar. There are plenty of food colourings on the market, and you can make the hard candy in multiple colours to make it attractive.

Step 4: Pouring the syrup into the mould.

Use a metal spoon or some kind of piping method to fill the moulds with the syrup that has been prepared. Try to fill the moulds soon after the syrup reaches 295 degrees as the syrup tend to harden up very fast and do not try to reheat the mixture.

Step 5: Removing the candy form the moulds.

Once the syrup hardens up, allow the candy to cool completely then you can remove them from the moulds. You need to do this step with care as there are chances for the candies to break if they are not cooled fully.

Step 6: Adding the thread to make the Jewels.

The final step is to add the thread in the candies to make it into a Jewel.

The post How to make hard candy jewels appeared first on Sweetie Darling.

Depending on the type of the moulds, you need to choose the mixture of the syrup. Candy jewels can be made from different materials. The hard candy jewels are edible, but you need to be careful when you give it to little children of the candies is quite small in size as it may be a choking hazard.

The following are some of the materials used for Jewel candy making:

Isomalt:

Isomalt is more of a sugar substitute that is made from sucrose and creates a humid and moisture-resistant product, and thus it makes an excellent product for Jewel candy. When isomalt is boiled, it does not require any anti-crystallising ingredients. It is also sugar-free and has low calories than the regular sugar, so you can use these to make candies if you are concerned about your health.

Boiled Sugar:

Boiled Sugar is a mixture of sugar and water. All you have to do is mix sugar and water in a pan and heat it to a particular temperature till you get a syrupy solution. An anti-crystallising agent like glucose is also sometimes added to make the mixture a bit thicker.

Fondant:

Fondant is kind of sugarcraft dough that is pliable, and you can press the fondant into the moulds.

Candy Clay:

Candy clays are also called as Chocolate Plastique, and they can be pressed into moulds just like you do with fondant. You can make the candy clay at home by adding glucose or corn syrup to the sugar solution and then coating it with chocolate.

Types of molds used:

Plastic moulds:

If you are using fondant and candy clay, then you can use plastic frames.

Silicone mould:

It is very easy to remove the candy from the Silicone mould, and you can use isomalt and boiled sugar in this type of frame.

The post All about Candy Jewels appeared first on Sweetie Darling.